RB stye FRP Rear Spoiler with LED 3rd brake light and wiring.
this spoiler comes primed and with the lighting harness, or with the harness installed. When installing simply use the supplied silicone to glue the LEDs into the holes after painting the spoiler. If you opt for the lights installed before shipping you will simply need to tape them off when painting the spoiler.
When installing your new spoiler first remove your existing 3rd brake light, the wires for it may be broken be the hinge already as this is common. Next feed the wires for the LEDs on your new spoiler through the 3rd brake light opening in the deak lid. Attaching gthe spoiler to the car can be done multiple ways, 3M tape can be used but might not hold for long with"spirited driving". If you plan to use rivets, screws, ect. we recommend pre-drilling the spoiler than lining it up on the car and marking your spots to drill.
after attaching the spoiler to your car you can simply connect the two wires in the harness to the wires in you stock harness, your new harness is long enough to connect were the stock harness commonly brakes.